Land Cruiser
Toyota Land Patrol Audio Modification| Shunde Toyota Land Patrol Audio Upgrade| Shunde Audio Modification Upgrade| Rebec Audio Modification | Rebec Car Audio
Add Date:2019/3/16 Clicks:
Toyota Land Cruiser is an imported ORV off-road vehicle produced by Toyota, which has been produced for more than 60 years, starting production as early as 1951. It has strong off-road performance and durability.
Land Cruisers carry Toyota's 60 years of technological and technical experience, and while maintaining high cross-country ability, comfort is constantly improving, but it is always short of sound insulation and sound. The sound configuration of the original car's 6-channel speaker, in the cruiser's large space and noisy environment, the sound is very thin, coupled with the ordinary material of the horn and the problem of insufficient power, the sound effect is even more discounted. Therefore, the owner went to our audio modification shop under the introduction of a friend, and decided on the modification plan after the store's recommendation and repeated audition, and upgraded the audio of the car.
Toyota Land Patrol audio modification configuration list
Toyota Land Patrol audio modification equipment display
The first thing is to carry out the whole car sound insulation treatment, the original door a thin waterproof paper without any sound insulation treatment, no wonder everyone says that the Japanese model sound insulation is poor, the inside of the door panel is actually a cavity similar to a cavity, noise from the door panel into the continuous inside can be amplified so the sound modification of the four doors sound insulation is essential. Simen absorbs and seals the sheet metal of the car through sound insulation and shock absorption materials, improves the defects of the horn installation environment, and effectively reduces wind noise and resonance noise. Before doing four-door sound insulation, it is necessary to remove the original door panel for cleaning process, so that the sound insulation product will better fit with the iron sheet of the door, achieve the effect of long-term non-falling off, and can be used for a long time. DJ Sound Insulation Silver King Kong is a lightweight and slightly elastic eco-friendly butyl rubber composite damping plate covered with aluminum film on the outer surface, which is physically soft and easy to apply, and can easily form a good bond with metal plates or other hard materials! Truly safe and soundproof!
Four-door double-decker DJ Silver King Kong
The front sound stage is a Rebec R6H speaker, and the speaker mid-bass is mounted on the door panel. The sound is very dynamic, with strong rendering, rich mid-bass and good low-frequency diving! The presence of a beautiful voice coil can enhance the sound quality of the speaker! The tweeter is mounted on the instrument panel. Whether it's pop, dance or dynamic symphony, the R6H can be performed vividly without sacrificing its performance.
The R6H two-way speaker is mounted on the door panel
The R6H two-way tweeter is mounted on the instrument panel
The rear sound field adopts Lei Beqin P6A two-way speaker, P6A can adapt to different music, whether it is dynamic, analytical power or sound field and other aspects are excellent. What is even more rare is that while it maintains a degree of tension in the big dynamics, it is also outstanding in its accurate capture of delicate emotions. The P6A has excellent balance to meet the requirements of most music lovers, with good transient response, rich low frequencies, elasticity, ambiguous timbre, and open soundstage. Listening to this P6A, it can clearly express the details and layers of music when driven by less power, and the sound texture is delicate, clean and transparent, which shows the skill of this speaker in its own timbre. Especially in the high frequency performance, you will be impressed by its open sound stage and fast frequency response, and the overall sound performance is full and not too intense, just right. The mid-frequency vocals are rich in emotion and full of charm.
Rebec P6A is installed in the door panel with a two-way frequency
The crossover is mounted on the door panel
The RA100 four-way amplifier makes the music more three-dimensional. The bass part of the original car is basically not, so install a Lebeqin N6 passive ultra-thin bass to make up for the lack of bass, and the original car host resolution is not high, resulting in audio signals are easy to lack in details, without replacing the host, add a Lebeqin DSP-406Q processor, they can increase the resolution of the host, so that the audio signal is more in place in terms of details. And in order to ensure the stable power output of the sound field horn, a Lei Beqin RA100 four-way power amplifier was added to make the sound field horn play its best.
The RA100 four-way amplifier is installed under the seat
Rebec DSP-406Q is installed under the seat
Rebec N6 passive ultra-thin bass under the seat
Insurance installation
After the upgrade of the car audio system, only from the appearance, there is no trace of any changes, but as long as the music sounds, it can be said that the ordinary ship has been upgraded to a fever ship, the sound is warm and delicate, the vocals are full of emotional expression is very sufficient, and the owner said that it has completely exceeded his expectations. The music played by the car is real and full, and the beauty of the music is fully displayed, and the owner is very satisfied after listening to it.